Tadeu's Wiki

User Tools

Site Tools

Trace:
telephony:asterisk_md3200_x100p_dahdi

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
telephony:asterisk_md3200_x100p_dahdi [2025/04/29 11:45] – [Setup Overview] prppedrotelephony:asterisk_md3200_x100p_dahdi [2025/04/29 11:47] (current) – prppedro
Line 1: Line 1:
 +
 +
 # Asterisk: DAHDI with X100P Clone (Ambient MD3200) # Asterisk: DAHDI with X100P Clone (Ambient MD3200)
  
Line 10: Line 12:
  
 Asterisk has excellent support on DAHDI. Zapata Telephony Project, or Zaptel, was written by Jim Dixon a long time ago, incubated by the Asterisk community. Now, Sangoma keeps maintaining it, even though both digital and analogue trunk lines are becoming nearly extinct animals, with the onset of SIP technology, now prevalent.  Asterisk has excellent support on DAHDI. Zapata Telephony Project, or Zaptel, was written by Jim Dixon a long time ago, incubated by the Asterisk community. Now, Sangoma keeps maintaining it, even though both digital and analogue trunk lines are becoming nearly extinct animals, with the onset of SIP technology, now prevalent. 
- 
 ## Setup Overview ## Setup Overview
  
 Gear:  Gear: 
-i7-3770 +  * i7-3770 
-16 GB of RAM +  * 16 GB of RAM 
-Proxmox v8+  * Proxmox v8
  
 My first idea was to do a PCI passthrough of that card to a virtual machine. That would provide optimal isolation and keep both the kernel module and Asterisk fairly isolated from the host. Unfortunately, this dumb board was sharing it's IRQ with SMBus. Some PCI hardware can deal with this, this card couldn't. So I decided on installing the DAHDI modules directly onto the host. Not ideal, but it is what it is.  My first idea was to do a PCI passthrough of that card to a virtual machine. That would provide optimal isolation and keep both the kernel module and Asterisk fairly isolated from the host. Unfortunately, this dumb board was sharing it's IRQ with SMBus. Some PCI hardware can deal with this, this card couldn't. So I decided on installing the DAHDI modules directly onto the host. Not ideal, but it is what it is. 
Line 63: Line 64:
  
 **Either way**, now we have a X100P clone card added to the system. Check endpoints at `/dev/dahdi` and `/sys/class/dahdi` to confirm it's working. That's about it for the host. Some of those devices will get bound to a LXC container.  **Either way**, now we have a X100P clone card added to the system. Check endpoints at `/dev/dahdi` and `/sys/class/dahdi` to confirm it's working. That's about it for the host. Some of those devices will get bound to a LXC container. 
 +
 +
 ### Asterisk on LXC ### Asterisk on LXC
  
Line 77: Line 80:
  
 It goes in the resource tab at PVE, like this:  It goes in the resource tab at PVE, like this: 
-{{ :telephony:pve_dahdi.png?400|}}+ 
 +{{ :telephony:pve_dahdi.png?400 | }}
  
 Install `dahdi-tools`:  Install `dahdi-tools`: 
telephony/asterisk_md3200_x100p_dahdi.1745937924.txt.gz · Last modified: 2025/04/29 11:45 by prppedro

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki